YUMBI Printer and POS Operation Checklist

YUMBI Printer and POS Operation Checklist

DO

  • Ensure the Point of Sale is turned ON and connected to the internet.
  • Ensure there is enough paper roll in the printer and that it is inserted securely and correctly.
  • Ensure the YUMBI GSM Printer is turned ON, is plugged into charge, and remains on at all times. Never turn the GSM Printer off. 
  • Ensure the YUMBI GSM Printer is positioned near the POS or where everyone can hear it ring when orders start coming in. Adjust the volume to the printer’s loudest setting.
  • Ensure that the printer antenna located on the left-hand side is tightly secured and in the upright position (depending on your printer model).
  • Ensure the printer is placed in an area where the store has the best network signal. To confirm the connectivity, look for the G and the flashing arrow pointing down that will appear at the top left corner of the GSM printer. These two icons represent a good network connection. Make sure it also has at least 4 signal strength bars showing. 
  • Check that the printer has a full battery charge, before and after load shedding occurs. The back-up battery only lasts a few hours. 


DON'T

  • Position the printer near kitchen stoves and other appliances.
  • Place the printer under the counter.
  • Turn the printer off at the end of the day.
  • Accept orders without reading the printed slip first.
  • Cancel orders without reading the printed slip first.

If you have any issues with your YUMBI Printer please contact the Customer Support Team on support@yumbi.com 

    • Related Articles

    • Why is the order printing through the YUMBI printer instead of the POS System?

      YUMBI seamlessly integrates with POS systems such as Aura, GAAP, and Micros, ensuring smooth operations across your restaurant's sales channels. Typically, the YUMBI GSM Printer serves as a backup, stepping in to receive orders when they cannot be ...

    • How do I operate the YUMBI Printer?

      Operating the YUMBI Printer is as easy as operating a cellphone. The steps outlined below can be followed to gain a better understanding of how to use the YUMBI Printer when an order is received. Steps to follow to operate the YUMBI Printer STEP 1: ...

    • What is the YUMBI GSM printer?

      The GSM Printer Explained The YUMBI Printer, a self-contained GSM printer, allows restaurants to seamlessly accept customer orders remotely via the internet. Equipped with a pre-installed GSM SIM card and a battery backup module, it is encased in a ...

    • How do I install the YUMBI Printer?

      Installation Steps Installation is quick and easy. Just follow the steps below: Step 1 Remove the printer and the cable from all of its packaging. Step 2 Connect the power cord to the printer and plug it into the wall plug socket. Step 3 Turn the ...

    • How do I troubleshoot issues with the YUMBI Printer?

      Normal Operating Screen When the YUMBI Printer is operating normally, a signal bar should be displayed on the right-hand side of the screen, as well as the letter 'G' and an arrow in the top left-hand corner. See image provided below of a fully ...