How do I install the YUMBI Printer?
Installation Steps
Installation is quick and easy. Just follow the steps below:
Step 1
Remove the printer and the cable from all of its packaging.
Step 2
Connect the power cord to the printer and plug it into the wall plug socket.
Step 3
Turn the printer on using the switch on the left side of the printer, under the antenna.
Step 4
The LCD screen should illuminate and after a few seconds, the word "YUMBI" should be displayed in the centre of the screen.
In addition to this, a signal bar should be displayed on the right-hand side of the screen, as well as the letter 'G' and an arrow in the top left hand corner.
NOTE: The YUMBI Printer does not need to be connected to the restaurants POS system, or any other device on the restaurant premises to function.
Finalising the installation and troubleshooting
Once all of the above steps have been performed, please contact the YUMBI Support Team to place a test order on the printer. This is to confirm that the YUMBI Printer is working as it should.
Note
Should you experience any issues while performing the above steps please contact us so we can assist on support@yumbi.com
Related Articles
What is the YUMBI GSM printer?
The GSM Printer Explained The YUMBI Printer, a self-contained GSM printer, allows restaurants to seamlessly accept customer orders remotely via the internet. Equipped with a pre-installed GSM SIM card and a battery backup module, it is encased in a ...YUMBI Printer and POS Operation Checklist
DO Ensure the Point of Sale is turned ON and connected to the internet. Ensure there is enough paper roll in the printer and that it is inserted securely and correctly. Ensure the YUMBI GSM Printer is turned ON, is plugged into charge, and remains on ...How do I operate the YUMBI Printer?
Operating the YUMBI Printer is as easy as operating a cellphone. The steps outlined below can be followed to gain a better understanding of how to use the YUMBI Printer when an order is received. Steps to follow to operate the YUMBI Printer STEP 1: ...Is your YUMBI Printer encountering a 'Not Registered' error?
When the YUMBI Printer displays a "not registered error," it typically indicates a network-related issue preventing the printer from connecting to the network, a condition known as the “printer is not polling.” During normal operation, the YUMBI ...How do I troubleshoot issues with the YUMBI Printer?
Normal Operating Screen When the YUMBI Printer is operating normally, a signal bar should be displayed on the right-hand side of the screen, as well as the letter 'G' and an arrow in the top left-hand corner. See image provided below of a fully ...